Vinyl And Laminate Cutter VLC 1000 Wolfcraft

This wolfcraft VLC 1000 is an excellent powerful vinyl and laminate cutter for professional use. Its gear unit makes it easy to cut thick laminate, vinyl and design boards.

• Gear unit for 3-fold power transmission: Its gear unit with 3-fold power transmission makes it easy to cut thick laminate, vinyl and design boards with a material thickness of up to 14 mm and a width of 370 mm.
• Optimised work progress: The patented return mechanism moves the blade back to its original position after the cut for fast work. Thanks to the smooth blade, even boards with integrated impact sound insulation can be cut without splinters.
• The VLC 1000 also efficiently handles click vinyl boards and vinyl tiles with a thickness of up to 6 mm; thanks to its EDP coating, nothing sticks to the blade.
• Work safely: When cutting, the cutter bar serrations and the limit stop ensure that the workpiece is securely fixed, while the non-slip cushion feet ensure the stability of the VLC 1000 itself. You can conveniently rest the panels on the material support.
• Suitable for thick boards: If you want to cut particularly thick boards, you can clamp them to the extra-wide cutter bar. With the VLC 1000, you produce minimal noise and dust when you work.

• Colour: Grey and black
• Material: Metal
• Dimensions: 80 x 20 x 19.5 cm (L x W x H)
• Laminate thickness: Max. 14 mm
• Vinyl thickness: Max. 6 mm
• Design thickness: Max. 11 mm
• Cutting width: Max.370 mm
• Back square angle: 90°
• Gear unit for 3-fold power transmission
• Easy to cut very thick laminate, vinyl and design boards
• Excellent return mechanism
• Blade with large cutting edge for clean cuts
• Safe, splinter-free cutting thanks to special blade geometry
• 90° stop adjustable in 4 steps (40 mm each)
• Front step for a max. cutting width of 210 mm
• Rear step position for a max. cutting width of 370 mm
• EDP (electro-deposit primer) blade coating
• Cutting gap can be adjusted in 4 steps: Step 1 (2–4 mm), step 2 (5–8 mm), step 3 (9–11 mm) and step 4 (12–14 mm)
• Removable, adjustable stop (for accurate 90° cuts and angular cuts from 0–180°), as well as rip cuts
• Extra-wide cutter bar makes
• With cutter bar serrations
• minimal noise and dust produced
• Slip-resistant cushioned feet for a sturdy footing
• Easy to assemble
• Delivery contains:
• 1 x Allen key
• 1 x Material support
• 1 x VLC 1000 vinyl and laminate cutter

• SKU: 444128