3M Extra Strong Double Sided Adhesive Tape, Can Be Reused After Washing And Drying With Water, For Cars, Exterior And Interior Decorations (Black, 2.5cm 3m),

1. This double-sided tape is 2.5cm wide, 3m long and has a single layer thickness of 1.1mm.

2. Widely used in LED light bars, electronic product assembly, nameplates, address labels, signs, mirrors, hooks, picture frames, power signs and other home and office decorations. It is also very suitable for connecting external components to the car, such as spoilers, stainless steel panels, aluminum slats for rear windows, ventilation sun visors and door strips.

3. Suitable for smooth surfaces, such as glass, marble, plastic, PVC, ceramic tile, wood and metal. Before using this double-sided tape, please clean the adhesive surface with alcohol and wait for it to dry.

4. Waterproof, high temperature resistance, no residue when removed. It is made of viscoelastic acrylic foam, which gives the tape excellent performance and permanent adhesion.

5. The best installation temperature range of this double sided tape is 16-40℃. In cold weather, the adhesion becomes weak. If the temperature is lower than 10°C, it is recommended to use a heat gun or a hair dryer to heat the double-sided tape.

Dimensions: width 2.5cm

Before using this double-sided tape, please clean the surface of the item with alcohol. The surface of the item should be smooth, clean and dry.

Feature:

1. High adhesion, water resistance, good adhesion and durability. By sticking as recommended, it can maintain lasting adhesion in high and low temperature environments.

2. Super sticky, can stay very sticky for a long time, suitable for a variety of different surfaces.

3. High temperature resistance, long-term high temperature resistance of 71℃, short-term high temperature resistance of 149℃.

4. No residue, no glue residue left when removed, and will not damage the surface of the car and the paint.

View:

1. This double-sided tape needs time and pressure to achieve maximum adhesion. You need to press hard on the surface and then peel off the red protective film. The best adhesion will occur over time. Achieve 50% bond strength in 20 minutes, 90% bond strength in 24 hours and 100% bond strength after 72 hours).

2. Initial adhesion will be weak in cold weather. If the temperature is below 10°C, it is recommended to use a hot air gun or hair dryer to heat the double-sided tape.</ p>