- Weight0.4 kg
- Type of packagingTape
- ManoMano ReferenceME71212145
- Product codeZGBC-0315-1177
Problem Solving: Waterproof sealing tape can cover silicone sealants that have been moldy or yellowed. We use upgraded PE material so you never have to worry about discoloration and mildew. Even in the corners, it’s still beautiful.
Application area: Where silicone sealant has been used. For example, around the kitchen sink, where the toilet and floor tiles are connected, around the shower tray, where the bathtub is in contact with the wall, etc., where no water leaks or enters.
Easy installation: The installation process of the bathtub seal does not require complicated installation tools. Just clean up the construction environment in advance, keep the site dry, then heat the sealing tape to increase its stickiness, press
firmly to confirm it is firmly attached to the wall or the ground, and wait for 24 hours. Everything will be refreshed. This is a must-have tool for DIY masters.
Our advantage: The pre-slotted design of the one-piece weather strip can be smoothly installed in 90 degree inner or outer corners. It can also be used smoothly in curved areas after heating. Pure white goes well with any trendy decor.
feature
Special Design: With a crease in the middle, it can be precisely attached to a 90 degree angle wall.
Strong tack: Slight heating can significantly increase tack, suitable for a variety of surfaces and angles.
Waterproof, moisture-proof, oil-proof, non-toxic, perfectly protect your home.
clean up corners
Remove excess residual glue or sealant and confirm that the area is dry and free of water.
Heated weather strips
Peel off the film on the back of the sealing tape and heat it to increase its viscosity by 80%.
Press firmly on the seal
The pre-slotted design can effectively deal with the 90-degree right-angle wall, and the wall fits tightly, which can make the sealing tape last longer.


















Reviews
There are no reviews yet.